Nano2 setup

[spooky76]

believe you me homes am trying to help you...

look that pictures copy the settings that I have and see if that helps you...
after you finish the settings scroll all the way down and highlight search
and press ok then yes and it will search the channels...
I don't search the channels by the disqec switch...

[camelbingo14]

yes spooky76 have the the setting and still no pic the channel keep on saying scramble have no ideal what is going on but thank you for your help and quick replay thank for all your help

[spooky76]

you loaded 8.10 right try loading
Nano2 Factory Firmware _8.08

here...
http://freesatfix.com/forums/showthread.php?t=98503

[camelbingo14]

hello spooky76 i only could load the 8.09 and 8.10 that is it everything i try to load the 8.08 it keep on saying install the latest file so is there anyway i could down grade the file thank

[Ridingboot]

Originally Posted by spooky76

down load these files...

Latest release for the CNX Nano2 fixes connection issues.
NPN_1.29.zip
mediafire.c o m/?537k4dbk08vm6zd

NPN_8.10_Factory.NPN.
XXX.mediafire.c o m/?gkkph7dlz0uvuo5

use 8.10 factory...
then 1.29
let me know ok...

I updated to 8.10 and had already the 1.29, dowloaded again 1.29 and installed Updates, searched channels (what was the easy part)

checking Ethernet is fine (Ping works too) but still have the Error when IKs registration should happend.

Could that be, because some say the CNX is actually DOWN anyway ?
In that case it makes no sense to try it untill thy are up again.

Thanks a lot

[lov5546]

Thanks having come from the old era got that fare now trying to access local HD feeds via UHF or preloaded files