nfusion solaris setting for receiver

[johnny88]

i had a viewsat and changed to nfusion. i got only echo 7 sat working but sat 8/10 won't come in. i scan channels but when i choose a 8/10 channel it comes up check att cable and sq is low in red. when i made the settings for sat echostar8/10 the sq is high 78/83.are my atenna setting wrong or whats the problem why i only get echostar 7 and not 8/10 with a dual head.

[Salesman]

If you are point at Dishnet your setting are


Sat 119 Echostar 7

LNB TYPE ? not sure what you have Single DPLNBF works for me

22Hz off

Diseqc1.1 port 1


Lnb power on




Sat 110

LNB TYPE ? not sure what you have Single DPLNBF works for me

22Hz off

Diseqc1.1 port 2


Lnb power on


Can you tell me what LNB you have ?

[johnny88]

i have a dual lnbf . looking at the dish in front , the one on the right is a dishnet digital lnbf, one on left is a bell dual lnbf. witch one should be port 1 and port 2, i do have ehcostar 7 working without putting it to port 1 or 2.

[racer55]

you haven't mentioned if you have a diseq switch installed in your system.
if you do have a diseq then by your description when facing the dish from the front,the lnb on the right would be echo 7 and the one on the left would be 8/10.
attach your cables to whatever port you chose for each and note where they are.
then enter the setup menu and assign the port you are connected to for each sat.