angeltrax
01-11-2008, 12:34 AM
1. download new file posted today 1-10-08 (uno file)in download section
2. download patch from 12-23 (exx file)in download section
3. put both files on memory stick
4.install 1-10-08 (uno file) through boatloader option in receiver under usb. this will reset the reciever completly, no channels everything is gone!
5.channel search (see below) assuming you have a dish 500 lnb/dish
EASY WAY
It is not stuck, you have no channels till your do a channel search again.
from menu goto installation (2nd option over) go down to diseqc switch
hit ok. your will see 4 diseqc on this page, set 1 to ECHO7 119W on dishpro 1,
on diseqc 2 set it to ECHO 8/10 110W also on dishpro1
leave 3 and 4 alone
goto bottom and hit search you will find your channels 5-7 min
6.Install patch(exx file) from 12-23 you downloaded in step 2
exit when done!
autoroll wont take to long
Enjoy the tube!!!
if you got rugrats be sure to lock those good channels out!!
steps 5 and 6 dont really matter which order!
Hope this helps for DN FTAers! Dont know about bev?
2. download patch from 12-23 (exx file)in download section
3. put both files on memory stick
4.install 1-10-08 (uno file) through boatloader option in receiver under usb. this will reset the reciever completly, no channels everything is gone!
5.channel search (see below) assuming you have a dish 500 lnb/dish
EASY WAY
It is not stuck, you have no channels till your do a channel search again.
from menu goto installation (2nd option over) go down to diseqc switch
hit ok. your will see 4 diseqc on this page, set 1 to ECHO7 119W on dishpro 1,
on diseqc 2 set it to ECHO 8/10 110W also on dishpro1
leave 3 and 4 alone
goto bottom and hit search you will find your channels 5-7 min
6.Install patch(exx file) from 12-23 you downloaded in step 2
exit when done!
autoroll wont take to long
Enjoy the tube!!!
if you got rugrats be sure to lock those good channels out!!
steps 5 and 6 dont really matter which order!
Hope this helps for DN FTAers! Dont know about bev?