PDA

View Full Version : no signal!!!!please help

pawel
02-12-2009, 10:07 PM
everything was working just fine on my 2 cnx recievers, when all of a sudden I have no more signal, 0 quality!!!I rewired , no change,I tried the bell satellite, still no signal. any one have any ideas?
thanks a million
p.
polarbear67`
02-12-2009, 10:12 PM
no signal means no connection between box and LNB this could be due to loose connections, bad switch, bad coax cable, bad LNB or blown power supply in the box, or LNB power not set to on in settings menu
pawel
02-12-2009, 10:18 PM
I will recheck all systems and let u know of the outcome.
thanks again
polarbear67`
02-12-2009, 10:18 PM
I will recheck all systems and let u know of the outcome.
thanks again

good luck - hope you find the problkem and its an easy fix
pawel
02-17-2009, 03:24 AM
ok, so i changed the lnb, rewired from lnb to cnx nano and trio, kept the bell dish and still no signal on either machine!
the dishh setting is pointed at 110, tp fequency 12224, lnb 11250, lnb power on,22 tone off, multi switch off, diseq off,and still nothing on either machine.
when i swith to nimiq 1 still no signal, the only odd thing is the trio unit is flashing lnb-f in front,
please help I think Im have been zapped with someting!!!
should I load the U3 unistall?
this has been a 1 week project and I live 2 hrs from the nearest gaz station or store!
ftaninja
02-17-2009, 04:19 AM
ok, so i changed the lnb, rewired from lnb to cnx nano and trio, kept the bell dish and still no signal on either machine!
the dishh setting is pointed at 110, tp fequency 12224, lnb 11250, lnb power on,22 tone off, multi switch off, diseq off,and still nothing on either machine.
when i swith to nimiq 1 still no signal, the only odd thing is the trio unit is flashing lnb-f in front,
please help I think Im have been zapped with someting!!!
should I load the U3 unistall?
this has been a 1 week project and I live 2 hrs from the nearest gaz station or store!

Do you have any switches in play? If so what type and have you checked them? Have you changed any setting in either unit. Is it possible you sat dish have moved slightly? You should have signal that is just the cable from the receiver to the lnb if you have zero some thing is wrong in transition. Thats why i thought it might be a switch. If it was good signal but bad quality then it would be a sat adjustment problem i would think. Answer these questions and im sure we will get it figured out.